Crankshaft

Before you replace the main bearings in your engine, please check the dimensions of the bearing lane very precisely. The bearing pressure is only 5/100 mm. In many engines, this measure is no longer available and the joy of the outdated engine can be easily clouded. The information refers to 3-part motor housings.
The original size of the storage lane is 60.24mm!

For oversized bearing sets, bearing 4 (in the cover) is always 50mm outside! It is not spindled to excess!

Since there are always incorrect orders, you determine the engine type and the bearing mass. Below are the different types. If you are unsure please ask us! The type code is engraved on top of the reinforcement of the housing screws.

Late 356, 356A and 356B without 356B Super 90: 1600, 1600S, 616/1, 616/2, 616/3 (industrial), 616/12, 616/18 (industrial)
Bearing 1 + 3 = 50mm ring bearing, bearing 3 = 50mm split bearing, bearing 4 = 40mm ring bearing
356B Super 90: 616/7
Bearings 1 - 3 = 55mm split bearings, bearing 4 = 40mm ring bearings
356C: 616/15, 616/16, 616/33 (industrial motor)
Bearing 1 = 50mm ring bearing, bearing 2 + 3 = 55mm split bearing, bearing 4 = 40mm Ring Bearing
912: 616/36, 616/39, 616/40
Bearing like 356C

Set seals for crankcase, all 356 and 912, not Carrera
SKU:
201005001
Shipping weight:
0,70 kg
59,00 € *
Available immediately
Delivery time: 2 - 9 Workdays
Dowel pin for flywheel, 356A, 356B, 356C and 912
SKU:
201010030
Shipping weight:
0,01 kg
1,10 € *
Available immediately
Delivery time: 2 - 9 Workdays
Spacer for crankshaft, 0,80-1,15mm, all 616/. engine, not for S90
SKU:
201010040V
Variations in:
  • Thickness:
Shipping weight:
0,01 kg
Thickness: 
21,20 € - 24,40 € *
Available immediately
Gasket for flywheel, 356A, 356B, 356C and 912
SKU:
201010050
Shipping weight:
0,01 kg
2,90 € *
Available immediately
Delivery time: 2 - 9 Workdays
Flywheel 180mm for 356A 356B, OEM Quality
SKU:
201010062
Shipping weight:
9,70 kg
569,50 € *
Low stock level
Delivery time: 2 - 9 Workdays
Flywheel 200mm for 356B and 356C, OEM Quality
SKU:
201010066
Shipping weight:
8,60 kg
492,00 € *
Available immediately
Delivery time: 2 - 9 Workdays
Flywheel 200mm for 356B Super 90, OEM Quality
SKU:
201010068
Shipping weight:
6,90 kg
569,60 € *
Low stock level
Delivery time: 2 - 9 Workdays
36mm gland nut with washer and needle bearing for 356A, 356B, 356C and 912
SKU:
201010070
Shipping weight:
0,22 kg
49,50 € *
Available immediately
Delivery time: 2 - 9 Workdays
Lock washer for gland nut, for 356A, 356B, 356C and 912
SKU:
201010100
Shipping weight:
0,02 kg
3,90 € *
Available immediately
Delivery time: 2 - 9 Workdays
Woodruff key for timing gear, for 356A, 356B, 356C and 912
SKU:
201010110
Shipping weight:
0,01 kg
1,75 € *
Available immediately
Delivery time: 2 - 9 Workdays
Woodruff key for crankshaft pulley, for 356A, 356B, 356C and 912
SKU:
201010120
Shipping weight:
0,01 kg
1,65 € *
Available immediately
Delivery time: 2 - 9 Workdays
Crankshaft timing gear, for 356A, 356B, 356C and 912
SKU:
201010130
Shipping weight:
0,40 kg
118,70 € *
Low stock level
Delivery time: 2 - 9 Workdays
Spacer ring for Crankshaft, for 356A, 356B, 356C and 912
SKU:
201010140
Shipping weight:
0,40 kg
27,80 € *
Available immediately
Delivery time: 2 - 9 Workdays
Distributor drive gear, for 356A, 356B, 356C and 912
SKU:
201010150
Shipping weight:
0,18 kg
57,40 € *
Available immediately
Delivery time: 2 - 9 Workdays
Locking ring, for 356A, 356B, 356C and 912
SKU:
201010160
Shipping weight:
0,05 kg
5,80 € *
Available immediately
Delivery time: 2 - 9 Workdays
Sealing washer for pulley, for 356A, 356B, 356C und 912
SKU:
201010170
Shipping weight:
0,01 kg
5,60 € *
Available immediately
Delivery time: 2 - 9 Workdays
Pulley with 4 hole, for 356A, 356B, 356C and 912
SKU:
201010180
Shipping weight:
1,20 kg
292,80 € *
Available immediately
Delivery time: 2 - 9 Workdays
Spring washer for pulley bolt, for 356A, 356B, 356C and 912
SKU:
201010190
Shipping weight:
0,02 kg
5,70 € *
Available immediately
Delivery time: 2 - 9 Workdays
Bolt for crankshaft pulley, for 356A, 356B, 356C and 912
SKU:
201010200
Shipping weight:
0,15 kg
44,80 € *
Available immediately
Delivery time: 2 - 9 Workdays
Set Rod bearing for 356A, 356B, 356C and 912
SKU:
201010210V
Variations in:
  • Bearing diameter:
Shipping weight:
0,20 kg
Bearing diameter: 
from
49,00 € *
Available immediately
Connecting rod bushing 356 912, all 1600 and 616/. engine
SKU:
201010230
Shipping weight:
0,03 kg
5,90 € *
Available immediately
Delivery time: 2 - 9 Workdays
Connecting rod nut Porsche 356 and 912, all 1600 and 616/. engine
SKU:
201010240
Shipping weight:
0,01 kg
2,95 € *
Available immediately
Delivery time: 2 - 9 Workdays
Pinion for distributor, for 356A, 356B, 356C and 912, original part
SKU:
201010250
Shipping weight:
0,25 kg
228,00 € *
Available immediately
Delivery time: 2 - 9 Workdays
Out of stock
Washer for Pinion, for 356A, 356B, 356C and 912
SKU:
201010260
Shipping weight:
0,01 kg
9,15 € *
Currently out of stock
Spring for Pinion, for 356A, 356B, 356C and 912
SKU:
201010270
Shipping weight:
0,00 kg
2,80 € *
Available immediately
Delivery time: 2 - 9 Workdays
Set main bearing for 356B Super 90
SKU:
201010320V
Variations in:
  • Case
  • Crank
Shipping weight:
0,80 kg
Case 
Crank 
348,00 € - 559,00 € *
Available immediately

Set main bearing for 356, 356A and 356B
The standard dimension of the line bore is 60.24mm! Bearing 4 has no external excess!

SKU:
201010410V
Variations in:
  • Case
  • Crankshaft
Shipping weight:
0,60 kg
Case 
Crankshaft 
290,00 € - 426,00 € *
Available immediately

Main bearing 1 steel for 356, 356A, 356B, 356C and 912. 356 only 3-piece case.
The standard dimension of the line bore is 60.24mm! Bearing 4 has no external excess!

SKU:
201010450V
Variations in:
  • Case
  • Crankshaft
Shipping weight:
0,40 kg
Case 
Crankshaft 
79,00 € - 92,00 € *
Available immediately

Main bearing 4 steel for 356, 356A, 356B, 356C and 912. 356 only 3-piece case.
The standard dimension of the line bore is 60.24mm! Bearing 4 has no external excess!

SKU:
201010490V
Variations in:
  • Case
  • Crankshaft
Shipping weight:
0,20 kg
Case 
Crankshaft 
68,00 € *
Low stock level

Main bearing 1 Aluminium for 356, 356A, 356B, 356C and 912. 356 only 3-piece case.
The standard dimension of the line bore is 60.24mm! Bearing 4 has no external excess!

SKU:
251011450V
Variations in:
  • Case
  • Crankshaft
Shipping weight:
0,24 kg
Case 
Crankshaft 
128,00 € *
Available immediately

Main bearing 4 Aluminium for 356, 356A, 356B, 356C and 912. 356 only 3-piece case.
The standard dimension of the line bore is 60.24mm! Bearing 4 has no external excess!

SKU:
251011490V
Variations in:
  • Case
  • Crankshaft
Shipping weight:
15,00 kg
Case 
Crankshaft 
74,00 € *
Low stock level

Items 1 - 31 of 31